| • |
Always confirm
that cable stands have entered fully in
the barrel |
| • |
After removing cable
insulation do not disturb/ remove/ cut any
wire strand. Use complete barrel for crimping
|
| • |
Ensure that all wire
strands are inserted in barrel accurately |
| • |
Use only reccommended
size of cable for specified size of lug/
splices |
| • |
If multiple crimps are
required then make first crimp which is
near to the lug palm |
| • |
Do not strip cable insulation
more than reccommended |
| • |
Do not us any other
crimping tool than the one reccommended
|
